Time Switches

12,000.00

Autenco Ceiling Flush Occupancy Switch

0 out of 5
(0)
SKU: TL PIRFL

The Autenco flush mounted PIR switch is suitable for easy mounting through
a 73/75mm diameter hole into a ceiling void which is at least 95mm deep.

Configurable for any room occupancy style, via Time and Lux level adjusters.

It switches on the lighting load if the area is occupied
and if the ambient lux level is less than the chosen adjusted level (10- to 1000 lux).

Add to cartCompare
26,000.00

Danlers Ceiling Directional Plug-in Occupancy Switch – 6 Amp 120° directional detection zone

0 out of 5
(0)
SKU: DN CEDR6P

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

Add to cartCompare
27,000.00

Danlers Ceiling Long Range Directional Plug-in Occupancy

0 out of 5
(0)
SKU: DN CEDR6PLR

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

Add to cartCompare
21,000.00

Danlers Ceiling Surface Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)
SKU: DN CESFPIR

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

Add to cartCompare
23,000.00

Danlers Ceiling Surface Plug-in Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)
SKU: DN CELO

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

Add to cartCompare
22,000.00

Danlers PIR Occupancy Switch Ceiling Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)
SKU: DN CEFLPIR

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

Add to cartCompare
12,000.00

Danlers Time Lag Switch 1-10 minutes

0 out of 5
(0)
SKU: DN TLSW10

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

These electronic Time lag switches are designed to switch lights, or other
loads, on for a limited time only, and to switch off automatically after a time lag has elapsed.

Add to cartCompare
10,000.00

Danlers Time Lag Switch 2 wire 1-10 minutes Illuminated

0 out of 5
(0)
SKU: DN TLSW10ILM

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

The TLSW 10 ILM has an illuminated push button
for easy location in the dark.
The button is see-through with a yellow illumination
when the load is on the button stops being illuminated

Add to cartCompare
24,000.00

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)
SKU: DN WAPIR

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

Add to cartCompare
21,000.00

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)
SKU: DN WACEPIR

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
Requires a Neutral wire.

It fits into a plaster depth (16mm) wall box.

Add to cartCompare
23,000.00

Elkay Outdoor Touch Timer

0 out of 5
(0)
SKU: EK 560A-1

The push button/touch sensor are part of the Elkay family of switches, timers and detectors
which save energy and increase convenience in and around your home, garden or premises.

The energy outdoor touch timer offers superb functionality and energy saving features
with a subtle touch activation for a wide range of outdoor use.

The touch timer, when used in outdoor environments offers
increased reliability as a non-mechanical electronic unit.
Knockouts on five faces, mounting screws and seal screw covers make for ease of installation.

Add to cartCompare
23,000.00

Luxomat Wall Mount PIR Occupancy Switch 2300w – 2 Wire

0 out of 5
(0)
SKU: BE 180R2W

The LUXOMAT® Indoor 180R/2W occupancy detector designed for flush mounting indoor applications

No Neutral wire is needed

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

Add to cartCompare
22,500.00

LUXOMAT® Combined Motion Detector and Acoustic Sensor Wall Switch with 180° detection area

0 out of 5
(0)
SKU: BE 180R

Replacements for existing wall switches.

Requires a Neutral wire.

The LUXOMAT® Indoor 180-R occupancy detector designed for flush mounting indoor applications

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

Add to cartCompare
10,500.00

Mini Occupancy Detector – White BEG LUXOMAT® PD9 range

0 out of 5
(0)
SKU: SM SLW360

SLFM360 can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

Add to cartCompare
3,000.00

Round Ceiling Socket for Plug-in DANLERS Controls

0 out of 5
(0)
SKU: DN CESOAdd to cartCompare
55,000.00

Sangamo Timer Q555

0 out of 5
(0)
SKU: SG Q555

Quartz-controlled, single pole,
Single throw, 20amp switch.

  • Q555 form 2
  • 24 hour dial. -Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omit device which will omit ON operations,
  • 4 pin base.
Add to cartCompare
55,000.00

Sangamo Timer S254

0 out of 5
(0)
SKU: SG S254

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S254 form 2.
  • Two pairs of ON / OFF levers.
  • “Day Omission” device which will omit ON operations,
  • 3 pin base.
Add to cartCompare
55,000.00

Sangamo Timer S255

0 out of 5
(0)
SKU: SG S255

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S255 form 2.
  • Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omission” device which will omit ON operations.
  • Early ON facility.
  • 4 pin base.
Add to cartCompare
8,500.00

Splash Proof shroud for EK400A Time Lag Switch

0 out of 5
(0)
SKU: EK 163Add to cartCompare
3,900.00

Square Ceiling Socket For Plug-in DANLERS Controls

0 out of 5
(0)
SKU: DN CESOSQ

Can be mounted on a square pattress box.

  • Dimensions: 87 x 87 x 13mm
  • M3.5 screws (20mm long). Supplied
  • Detailed Spec below
Add to cartCompare
3,900.00

Time Lag Slave Switch use with Danlers Time Lag Switches

0 out of 5
(0)
SKU: DN SS1SL

SS 1SL is a normally open (or push to make) push button.

It can be used as a slave switch to operate a DANLERS time lag switches

See Detailed Spec for Wiring Options

Add to cartCompare
10,500.00

Timeguard SLFM360N 360° Ceiling Occupancy PIR Flush Mounting

0 out of 5
(0)
SKU: SM SLFM360N

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

Add to cartCompare
10,500.00

Timeguard SLW360N 360° Ceiling Occupancy Pir Surface Mounting

0 out of 5
(0)
SKU: SM SLW360N

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

Add to cartCompare
8,500.00

Vacuum Time Lag Switch

0 out of 5
(0)
SKU: EK 400A

3 Amp Fluorescent – 6 amp Tungsten Lighting Load

  • Pneumatic Timer
  • Replaces existing single gang wall switches
  • No neutral required
  • Adjustable time range up to 5 minutes.
  • 1 or 2 way
  • Approved to BS EN 60730-2-7 1992
  • For fluorescent or incandescent lighting
  • Ideal for staircases and corridors
  • For either installation or replacement of existing single gang switches. Pushing the button switches the contacts and activates the time delay.
  • The “400” series can be made splash proof by the fitting of a rubber shroud. Part No.163. (Note: rubber shroud not suitable for high UV exposure.).
Add to cartCompare

Autenco Ceiling Flush Occupancy Switch

0 out of 5
(0)

The Autenco flush mounted PIR switch is suitable for easy mounting through
a 73/75mm diameter hole into a ceiling void which is at least 95mm deep.

Configurable for any room occupancy style, via Time and Lux level adjusters.

It switches on the lighting load if the area is occupied
and if the ambient lux level is less than the chosen adjusted level (10- to 1000 lux).

SKU: TL PIRFL
12,000.00 Add to cartCompare

Danlers Ceiling Directional Plug-in Occupancy Switch – 6 Amp 120° directional detection zone

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

SKU: DN CEDR6P
26,000.00 Add to cartCompare

Danlers Ceiling Long Range Directional Plug-in Occupancy

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

SKU: DN CEDR6PLR
27,000.00 Add to cartCompare

Danlers Ceiling Surface Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

SKU: DN CESFPIR
21,000.00 Add to cartCompare

Danlers Ceiling Surface Plug-in Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

SKU: DN CELO
23,000.00 Add to cartCompare

Danlers PIR Occupancy Switch Ceiling Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

SKU: DN CEFLPIR
22,000.00 Add to cartCompare

Danlers Time Lag Switch 1-10 minutes

0 out of 5
(0)

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

These electronic Time lag switches are designed to switch lights, or other
loads, on for a limited time only, and to switch off automatically after a time lag has elapsed.

SKU: DN TLSW10
12,000.00 Add to cartCompare

Danlers Time Lag Switch 2 wire 1-10 minutes Illuminated

0 out of 5
(0)

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

The TLSW 10 ILM has an illuminated push button
for easy location in the dark.
The button is see-through with a yellow illumination
when the load is on the button stops being illuminated

SKU: DN TLSW10ILM
10,000.00 Add to cartCompare

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

SKU: DN WAPIR
24,000.00 Add to cartCompare

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
Requires a Neutral wire.

It fits into a plaster depth (16mm) wall box.

SKU: DN WACEPIR
21,000.00 Add to cartCompare

Elkay Outdoor Touch Timer

0 out of 5
(0)

The push button/touch sensor are part of the Elkay family of switches, timers and detectors
which save energy and increase convenience in and around your home, garden or premises.

The energy outdoor touch timer offers superb functionality and energy saving features
with a subtle touch activation for a wide range of outdoor use.

The touch timer, when used in outdoor environments offers
increased reliability as a non-mechanical electronic unit.
Knockouts on five faces, mounting screws and seal screw covers make for ease of installation.

SKU: EK 560A-1
23,000.00 Add to cartCompare

Luxomat Wall Mount PIR Occupancy Switch 2300w – 2 Wire

0 out of 5
(0)

The LUXOMAT® Indoor 180R/2W occupancy detector designed for flush mounting indoor applications

No Neutral wire is needed

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

SKU: BE 180R2W
23,000.00 Add to cartCompare

LUXOMAT® Combined Motion Detector and Acoustic Sensor Wall Switch with 180° detection area

0 out of 5
(0)

Replacements for existing wall switches.

Requires a Neutral wire.

The LUXOMAT® Indoor 180-R occupancy detector designed for flush mounting indoor applications

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

SKU: BE 180R
22,500.00 Add to cartCompare

Mini Occupancy Detector – White BEG LUXOMAT® PD9 range

0 out of 5
(0)

SLFM360 can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

SKU: SM SLW360
10,500.00 Add to cartCompare

Sangamo Timer Q555

0 out of 5
(0)

Quartz-controlled, single pole,
Single throw, 20amp switch.

  • Q555 form 2
  • 24 hour dial. -Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omit device which will omit ON operations,
  • 4 pin base.
SKU: SG Q555
55,000.00 Add to cartCompare

Sangamo Timer S254

0 out of 5
(0)

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S254 form 2.
  • Two pairs of ON / OFF levers.
  • “Day Omission” device which will omit ON operations,
  • 3 pin base.
SKU: SG S254
55,000.00 Add to cartCompare

Sangamo Timer S255

0 out of 5
(0)

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S255 form 2.
  • Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omission” device which will omit ON operations.
  • Early ON facility.
  • 4 pin base.
SKU: SG S255
55,000.00 Add to cartCompare

Square Ceiling Socket For Plug-in DANLERS Controls

0 out of 5
(0)

Can be mounted on a square pattress box.

  • Dimensions: 87 x 87 x 13mm
  • M3.5 screws (20mm long). Supplied
  • Detailed Spec below
SKU: DN CESOSQ
3,900.00 Add to cartCompare

Time Lag Slave Switch use with Danlers Time Lag Switches

0 out of 5
(0)

SS 1SL is a normally open (or push to make) push button.

It can be used as a slave switch to operate a DANLERS time lag switches

See Detailed Spec for Wiring Options

SKU: DN SS1SL
3,900.00 Add to cartCompare

Timeguard SLFM360N 360° Ceiling Occupancy PIR Flush Mounting

0 out of 5
(0)

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

SKU: SM SLFM360N
10,500.00 Add to cartCompare

Timeguard SLW360N 360° Ceiling Occupancy Pir Surface Mounting

0 out of 5
(0)

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

SKU: SM SLW360N
10,500.00 Add to cartCompare

Vacuum Time Lag Switch

0 out of 5
(0)

3 Amp Fluorescent – 6 amp Tungsten Lighting Load

  • Pneumatic Timer
  • Replaces existing single gang wall switches
  • No neutral required
  • Adjustable time range up to 5 minutes.
  • 1 or 2 way
  • Approved to BS EN 60730-2-7 1992
  • For fluorescent or incandescent lighting
  • Ideal for staircases and corridors
  • For either installation or replacement of existing single gang switches. Pushing the button switches the contacts and activates the time delay.
  • The “400” series can be made splash proof by the fitting of a rubber shroud. Part No.163. (Note: rubber shroud not suitable for high UV exposure.).
SKU: EK 400A
8,500.00 Add to cartCompare

Autenco Ceiling Flush Occupancy Switch

0 out of 5
(0)

The Autenco flush mounted PIR switch is suitable for easy mounting through
a 73/75mm diameter hole into a ceiling void which is at least 95mm deep.

Configurable for any room occupancy style, via Time and Lux level adjusters.

It switches on the lighting load if the area is occupied
and if the ambient lux level is less than the chosen adjusted level (10- to 1000 lux).

12,000.00 Add to cartCompare

Danlers Ceiling Directional Plug-in Occupancy Switch – 6 Amp 120° directional detection zone

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

26,000.00 Add to cartCompare

Danlers Ceiling Long Range Directional Plug-in Occupancy

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

27,000.00 Add to cartCompare

Danlers Ceiling Surface Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

21,000.00 Add to cartCompare

Danlers Ceiling Surface Plug-in Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

23,000.00 Add to cartCompare

Danlers PIR Occupancy Switch Ceiling Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

22,000.00 Add to cartCompare

Danlers Time Lag Switch 1-10 minutes

0 out of 5
(0)

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

These electronic Time lag switches are designed to switch lights, or other
loads, on for a limited time only, and to switch off automatically after a time lag has elapsed.

12,000.00 Add to cartCompare

Danlers Time Lag Switch 2 wire 1-10 minutes Illuminated

0 out of 5
(0)

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

The TLSW 10 ILM has an illuminated push button
for easy location in the dark.
The button is see-through with a yellow illumination
when the load is on the button stops being illuminated

10,000.00 Add to cartCompare

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

24,000.00 Add to cartCompare

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
Requires a Neutral wire.

It fits into a plaster depth (16mm) wall box.

21,000.00 Add to cartCompare

Elkay Outdoor Touch Timer

0 out of 5
(0)

The push button/touch sensor are part of the Elkay family of switches, timers and detectors
which save energy and increase convenience in and around your home, garden or premises.

The energy outdoor touch timer offers superb functionality and energy saving features
with a subtle touch activation for a wide range of outdoor use.

The touch timer, when used in outdoor environments offers
increased reliability as a non-mechanical electronic unit.
Knockouts on five faces, mounting screws and seal screw covers make for ease of installation.

23,000.00 Add to cartCompare

Luxomat Wall Mount PIR Occupancy Switch 2300w – 2 Wire

0 out of 5
(0)

The LUXOMAT® Indoor 180R/2W occupancy detector designed for flush mounting indoor applications

No Neutral wire is needed

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

23,000.00 Add to cartCompare

LUXOMAT® Combined Motion Detector and Acoustic Sensor Wall Switch with 180° detection area

0 out of 5
(0)

Replacements for existing wall switches.

Requires a Neutral wire.

The LUXOMAT® Indoor 180-R occupancy detector designed for flush mounting indoor applications

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

22,500.00 Add to cartCompare

Mini Occupancy Detector – White BEG LUXOMAT® PD9 range

0 out of 5
(0)

SLFM360 can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

10,500.00 Add to cartCompare

Sangamo Timer Q555

0 out of 5
(0)

Quartz-controlled, single pole,
Single throw, 20amp switch.

  • Q555 form 2
  • 24 hour dial. -Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omit device which will omit ON operations,
  • 4 pin base.
55,000.00 Add to cartCompare

Sangamo Timer S254

0 out of 5
(0)

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S254 form 2.
  • Two pairs of ON / OFF levers.
  • “Day Omission” device which will omit ON operations,
  • 3 pin base.
55,000.00 Add to cartCompare

Sangamo Timer S255

0 out of 5
(0)

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S255 form 2.
  • Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omission” device which will omit ON operations.
  • Early ON facility.
  • 4 pin base.
55,000.00 Add to cartCompare

Square Ceiling Socket For Plug-in DANLERS Controls

0 out of 5
(0)

Can be mounted on a square pattress box.

  • Dimensions: 87 x 87 x 13mm
  • M3.5 screws (20mm long). Supplied
  • Detailed Spec below
3,900.00 Add to cartCompare

Time Lag Slave Switch use with Danlers Time Lag Switches

0 out of 5
(0)

SS 1SL is a normally open (or push to make) push button.

It can be used as a slave switch to operate a DANLERS time lag switches

See Detailed Spec for Wiring Options

3,900.00 Add to cartCompare

Timeguard SLFM360N 360° Ceiling Occupancy PIR Flush Mounting

0 out of 5
(0)

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

10,500.00 Add to cartCompare

Timeguard SLW360N 360° Ceiling Occupancy Pir Surface Mounting

0 out of 5
(0)

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

10,500.00 Add to cartCompare

Vacuum Time Lag Switch

0 out of 5
(0)

3 Amp Fluorescent – 6 amp Tungsten Lighting Load

  • Pneumatic Timer
  • Replaces existing single gang wall switches
  • No neutral required
  • Adjustable time range up to 5 minutes.
  • 1 or 2 way
  • Approved to BS EN 60730-2-7 1992
  • For fluorescent or incandescent lighting
  • Ideal for staircases and corridors
  • For either installation or replacement of existing single gang switches. Pushing the button switches the contacts and activates the time delay.
  • The “400” series can be made splash proof by the fitting of a rubber shroud. Part No.163. (Note: rubber shroud not suitable for high UV exposure.).
8,500.00 Add to cartCompare

Autenco Ceiling Flush Occupancy Switch

0 out of 5
(0)

The Autenco flush mounted PIR switch is suitable for easy mounting through
a 73/75mm diameter hole into a ceiling void which is at least 95mm deep.

Configurable for any room occupancy style, via Time and Lux level adjusters.

It switches on the lighting load if the area is occupied
and if the ambient lux level is less than the chosen adjusted level (10- to 1000 lux).

12,000.00 Add to cartCompare

Danlers Ceiling Directional Plug-in Occupancy Switch – 6 Amp 120° directional detection zone

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

26,000.00 Add to cartCompare

Danlers Ceiling Long Range Directional Plug-in Occupancy

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

27,000.00 Add to cartCompare

Danlers Ceiling Surface Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

21,000.00 Add to cartCompare

Danlers Ceiling Surface Plug-in Occupancy Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

23,000.00 Add to cartCompare

Danlers PIR Occupancy Switch Ceiling Switch – 6 Amps Detection zone: 360°

0 out of 5
(0)

PIR occupancy switch has a passive infra-red quad person detector.
This detects the movement of a warm body, moving within its detection zone.
When such a movement is detected the load is switched on.

There is an adjustable time lag function,
The time lag is the time that must elapse with no movement detected
before the PIR occupancy switch will switch off.

22,000.00 Add to cartCompare

Danlers Time Lag Switch 1-10 minutes

0 out of 5
(0)

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

These electronic Time lag switches are designed to switch lights, or other
loads, on for a limited time only, and to switch off automatically after a time lag has elapsed.

12,000.00 Add to cartCompare

Danlers Time Lag Switch 2 wire 1-10 minutes Illuminated

0 out of 5
(0)

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

The TLSW 10 ILM has an illuminated push button
for easy location in the dark.
The button is see-through with a yellow illumination
when the load is on the button stops being illuminated

10,000.00 Add to cartCompare

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
No neutral wire is needed.
Hence they are very quick and inexpensive to install.

24,000.00 Add to cartCompare

Danlers Wall PIR Occupancy Switch Detection zone: 120°

0 out of 5
(0)

Wall Mounted PIR Switch

Direct replacements for existing wall switches.
Requires a Neutral wire.

It fits into a plaster depth (16mm) wall box.

21,000.00 Add to cartCompare

Elkay Outdoor Touch Timer

0 out of 5
(0)

The push button/touch sensor are part of the Elkay family of switches, timers and detectors
which save energy and increase convenience in and around your home, garden or premises.

The energy outdoor touch timer offers superb functionality and energy saving features
with a subtle touch activation for a wide range of outdoor use.

The touch timer, when used in outdoor environments offers
increased reliability as a non-mechanical electronic unit.
Knockouts on five faces, mounting screws and seal screw covers make for ease of installation.

23,000.00 Add to cartCompare

Luxomat Wall Mount PIR Occupancy Switch 2300w – 2 Wire

0 out of 5
(0)

The LUXOMAT® Indoor 180R/2W occupancy detector designed for flush mounting indoor applications

No Neutral wire is needed

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

23,000.00 Add to cartCompare

LUXOMAT® Combined Motion Detector and Acoustic Sensor Wall Switch with 180° detection area

0 out of 5
(0)

Replacements for existing wall switches.

Requires a Neutral wire.

The LUXOMAT® Indoor 180-R occupancy detector designed for flush mounting indoor applications

The 180 utilizes infra red and acoustic sensing technology
to detect the presence and movement of persons
It contains a twilight (lux) sensor a microphone and a timer

The LUXOMAT® Indoor 180 is an automatic switching device
which operates on the principle of infrared technology.
It continuously measures the ambient temperature and the ambient light level and compares it
with the infrared radiation emitted from any moving form which enters its detection zone.
Any differential results in automatic switching, provided the light level is beyond a preset light level.

22,500.00 Add to cartCompare

Mini Occupancy Detector – White BEG LUXOMAT® PD9 range

0 out of 5
(0)

SLFM360 can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

10,500.00 Add to cartCompare

Sangamo Timer Q555

0 out of 5
(0)

Quartz-controlled, single pole,
Single throw, 20amp switch.

  • Q555 form 2
  • 24 hour dial. -Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omit device which will omit ON operations,
  • 4 pin base.
55,000.00 Add to cartCompare

Sangamo Timer S254

0 out of 5
(0)

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S254 form 2.
  • Two pairs of ON / OFF levers.
  • “Day Omission” device which will omit ON operations,
  • 3 pin base.
55,000.00 Add to cartCompare

Sangamo Timer S255

0 out of 5
(0)

Synchronous 24 hour dial.
Single pole, single throw 20amp switch.

  • S255 form 2.
  • Two pairs of ON / OFF levers.
  • Independent motor connections, “
  • Day Omission” device which will omit ON operations.
  • Early ON facility.
  • 4 pin base.
55,000.00 Add to cartCompare

Square Ceiling Socket For Plug-in DANLERS Controls

0 out of 5
(0)

Can be mounted on a square pattress box.

  • Dimensions: 87 x 87 x 13mm
  • M3.5 screws (20mm long). Supplied
  • Detailed Spec below
3,900.00 Add to cartCompare

Time Lag Slave Switch use with Danlers Time Lag Switches

0 out of 5
(0)

SS 1SL is a normally open (or push to make) push button.

It can be used as a slave switch to operate a DANLERS time lag switches

See Detailed Spec for Wiring Options

3,900.00 Add to cartCompare

Timeguard SLFM360N 360° Ceiling Occupancy PIR Flush Mounting

0 out of 5
(0)

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

10,500.00 Add to cartCompare

Timeguard SLW360N 360° Ceiling Occupancy Pir Surface Mounting

0 out of 5
(0)

SLFM360N can be wired in parallel to enable any detector to turn ON
all of the lights connected to it (the total wattage capability of the unit must not be exceeded).

Ideal for energy saving installations in the workplace, corridors, offices, toilets etc., where light control can make all the difference

10,500.00 Add to cartCompare

Vacuum Time Lag Switch

0 out of 5
(0)

3 Amp Fluorescent – 6 amp Tungsten Lighting Load

  • Pneumatic Timer
  • Replaces existing single gang wall switches
  • No neutral required
  • Adjustable time range up to 5 minutes.
  • 1 or 2 way
  • Approved to BS EN 60730-2-7 1992
  • For fluorescent or incandescent lighting
  • Ideal for staircases and corridors
  • For either installation or replacement of existing single gang switches. Pushing the button switches the contacts and activates the time delay.
  • The “400” series can be made splash proof by the fitting of a rubber shroud. Part No.163. (Note: rubber shroud not suitable for high UV exposure.).
8,500.00 Add to cartCompare

Showing all 24 results