Fire & Smoke Equipment

7,000.00

12/24v 1w Red Fire Alarm LED Strobe 60 Flash per Min

0 out of 5
(0)
SKU: ES FS1L

12v or 24v and has a flash rate of 60/minutes.

IP rating: IP65

Current: 80mA at 12v dc
30mA at 24v dc.

Operational temperature: -10 to 50ºC.

Polycarbonate Lens and ABS base construction.

Add to cartCompare
3,400.00

13 Amp Unswitched Fused Spur – Red c/w 3Amp Fuse – Red

0 out of 5
(0)
SKU: AA 13CFR

13 Amp Unswitched Fused Spur – Red
c/w 3Amp Fuse – Red

Add to cartCompare
49,000.00

2 Amp Boxed Power Supply – 24v

0 out of 5
(0)
SKU: ES BPS2

2 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 2A at 27.6V DC.

Add to cartCompare
40,000.00

2 Zone Fire Alarm Panel

0 out of 5
(0)
SKU: ES MAG2
  • Two zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 2 End of line modules ( included )
  • Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 285x95x78mm
  • Weight 2.7kg
Add to cartCompare
40,000.00

2 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
SKU: ES MAG2PC
  • Two zone conventional fire panel.
  • Unlimited number of call-points.
  • 30 fire detectors per zone.
  • Active end of line monitoring.
  • Two sounder circuit outputs.
  • Fault identification.
  • One-man test facility.
  • Volt free fire & fault relay.
  • 2 End of line modules ( included ).
  • Mains power supply 230V AC ? – 10%.
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included.
  • Sounder output per circuit 24V – 0.3A.
  • Working temperature 0 to 40C.
  • Dimensions 334x290x100mm.
  • Weight 2.2kg.
Add to cartCompare
48,000.00

4 Zone Fire Alarm Panel

0 out of 5
(0)
SKU: ES MAG4
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 315x216x78mm
  • Weight 3.5kg
Add to cartCompare
48,000.00

4 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
SKU: ES MAG4PC
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 334x290x100mm
  • Weight 2.4kg
Add to cartCompare
11,000.00

4 Zone Sounder Expander

0 out of 5
(0)
SKU: ES MAGSC816

Use with – ES MAG816 – 8 Zone Fire Panel – Expandable to 16 zones.

Add to cartCompare
66,000.00

5 Amp Boxed Power Supply – 24v

0 out of 5
(0)
SKU: ES BPS5
  • 5 Amp Power Supply Unit with battery monitoring
  • Mains supply 230V/240V 50Hz
  • Maximum battery size 2 x 7Ah 12V S.L.A batteries
  • Total output 5A at 27.6V DC
  • Dimensions 275(h) x 330(w) x 80(d) mm
  • Weight 5.5kg
Add to cartCompare
81,000.00

8 Zone Fire Alarm Panel Expandable to 16 zones

0 out of 5
(0)
SKU: ES MAG816
  • Up to 16 programmable zones.
  • Up to 16 sounder circuits.
  • Active end of line monitoring and head removal.
  • 32 fire detectors per zone.
  • Unlimited number of call points per zone.
  • Integral evacuate alarm button.
  • Repeater facility.
  • ‘Class change’ facility.
  • Enable/disable security key.
  • One man walk test facility.
  • Volt free fire change over relay.
  • Volt free fault change over relay.
  • Individual sounder circuit fault ID.
  • Individual zone/sounder isolate.
  • Alarm delay options.
  • BS5839 and EN54 P2/4 compliant.
  • CE certified.
  • Requires 1 x 12v ES BAT 18 Battery. See Below.
  • ABS casing.
Add to cartCompare
10,000.00

Banshee Sounder Red (103dBA)

0 out of 5
(0)
SKU: ES BA1R
  • Banshee red colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
Add to cartCompare
12,000.00

Banshee Sounder White (103dBA)

0 out of 5
(0)
SKU: ES BA1W
  • Banshee white colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
Add to cartCompare
38,000.00

Boxed Power Supply 1 amp

0 out of 5
(0)
SKU: ES BPS1

1 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 1A at 27.6V DC.

Add to cartCompare
4,000.00

Fire Alarm Break Glass – Surface Call Point – Resettable Red

0 out of 5
(0)
SKU: ES SCP2R

Surface or Flush Mounting Red Call Point

Add to cartCompare
15,000.00

Fire Alarm Door Holder – 240V Ac

0 out of 5
(0)
SKU: ES DR240
  • 240vAC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
Add to cartCompare
Placeholder 14,000.00

Fire Alarm Door Holder – 24V Dc

0 out of 5
(0)
SKU: ES DR24
  • 24vDC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
Add to cartCompare

Fire Alarm Switch 45A Main Switch & 6A MCB – IP40

0 out of 5
(0)
SKU: N/A

Fire Alarm Switch
45A Main Switch & 6A MCB – IP40

Read moreCompare
9,500.00

Fire Blanket

0 out of 5
(0)
SKU: SN FB
1000mm x 1000mm
Blanket made from woven glass fibre ( totally asbestos-free )
Add to cartCompare
12,000.00

Fireline Detector Base Sounder 93dba

0 out of 5
(0)
SKU: ES DBS1

Current: 18 mA

Add to cartCompare
3,600.00

Fixed Heat Detector c/w Base

0 out of 5
(0)
SKU: ES FHD2
  • Conventional Fixed Temperature Heat Detector c/w base
    (Schottky diode in base – diode type BYV-1060)
  • Magnet test facility
  • Operating voltage 15 to 30 V DC
  • Current in stand-by 40uA at 22.5V DC
  • Current in alarm 14 – 18mA at 22.5V DC
  • Dimensions 106 (diameter) x 48(h) mm
  • Level of protection IP30.
Add to cartCompare
7,000.00

Floor Mounting Bracket for Door Holders

0 out of 5
(0)
SKU: ES FMB

Floor Mounting Bracket
for Door Holders

Add to cartCompare
8,000.00

Internal Fire Bell 24v (97dBA)

0 out of 5
(0)
SKU: ES IFB1

Internal 6” inch (150mm) Red Fire Alarm Bell.

Sound output 97dBA.

Current consumption 15mA.

Operating voltage 24V DC.

Weight 410g.

Add to cartCompare

Kidde – Mains Wireless Alarm Base & Accessories

0 out of 5
(0)
SKU: N/A

The RF-SFTP unit is an accessory which can simply be fitted
in place of the standard base plate on NEW Slick® (‘wireless capability’) alarms.

It enables a versatile system of interconnected alarm units to be set up without the need for additional interconnection cable.

Read moreCompare
9,800.00

Kidde 1kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)
SKU: KD KSPS1X

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

Add to cartCompare
14,500.00

Kidde 2kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)
SKU: KD KSPD2G

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

Add to cartCompare
10,000.00

Kidde Easi-Action 2kg Home Fire Extinguisher

0 out of 5
(0)
SKU: KD KSF2GM

Revolutionary new ‘Easi-Action’ design, simple one-handed operation fire
extinguisher for small domestic fires.

This extinguisher is fully approved for use in the event of a fire and as a
means to clear a route to safety and as long as used when safe to do so can
also limit damage to property and possessions

Add to cartCompare
18,000.00

Kidde Mains Heat Alarm + Rechargeable Lithium

0 out of 5
(0)
SKU: KD 3SFWR

Mains powered (for professional installation) with the latest Rechargeable
Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

Add to cartCompare
8,700.00

Kidde Mains Ionisation Smoke Alarm + Alkaline Battery

0 out of 5
(0)
SKU: KD 1SFW

Mains powered (for professional installation) with Duracell
loose alkaline battery back-up and 6-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

Add to cartCompare
19,000.00

Kidde Mains Ionisation Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)
SKU: KD 1SFWR

Mains powered (for professional installation) with the latest
Rechargeable Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

Add to cartCompare
20,000.00

Kidde Mains Optical Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)
SKU: KD 2SFWR

Both models are mains powered (for professional installation) with rechargeable Lithium cell back-up and full 10-year guarantee.,

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

Optical Smoke Alarms are for use in escape and circulation routes and in areas where there
is danger of ignition of furniture and surroundings by cigarettes.

Add to cartCompare
3,000.00

Kidde Surface Pattress – Optional

0 out of 5
(0)
SKU: KD SMK23U

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

Add to cartCompare
Browse Wishlist
1,500.00

Kidde Surface Pattress – Optional

0 out of 5
(0)
SKU: N/A

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

Add to cartCompare
750.00

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E Red Max length 40Mtrs

0 out of 5
(0)
SKU: NB 1/2R

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

Add to cartCompare
1,200.00

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E White

0 out of 5
(0)
SKU: NB 1/2

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

Add to cartCompare
850.00

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E Red

0 out of 5
(0)
SKU: NB 1.5/2R

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

Add to cartCompare
1,250.00

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E White

0 out of 5
(0)
SKU: NB 1.5/2

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

Add to cartCompare
1,700.00

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E Red

0 out of 5
(0)
SKU: NB 1.5/4R

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

Add to cartCompare
1,700.00

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E White

0 out of 5
(0)
SKU: NB 1.5/4

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

Add to cartCompare
1,200.00

NoBurn Fire Platinum Resistant Cable 2.5mm² 2+E Red

0 out of 5
(0)
SKU: NB 2.5/2R

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

Add to cartCompare
8,500.00

Optical Smoke Detector c/w Base

0 out of 5
(0)
SKU: ES PSD2
  • Conventional Optical Smoke Detector c/w base
    (Schottky diode in base – diode type BYV-1060).
  • Magnet test facility.
  • Operating voltage 15 to 30 V DC.
  • Current in stand-by 60uA at 22.5V DC.
  • Current in alarm 14 – 18mA at 22.5V DC.
  • Level of protection IP40.
Add to cartCompare

12/24v 1w Red Fire Alarm LED Strobe 60 Flash per Min

0 out of 5
(0)

12v or 24v and has a flash rate of 60/minutes.

IP rating: IP65

Current: 80mA at 12v dc
30mA at 24v dc.

Operational temperature: -10 to 50ºC.

Polycarbonate Lens and ABS base construction.

SKU: ES FS1L
7,000.00 Add to cartCompare

13 Amp Unswitched Fused Spur – Red c/w 3Amp Fuse – Red

0 out of 5
(0)

13 Amp Unswitched Fused Spur – Red
c/w 3Amp Fuse – Red

SKU: AA 13CFR
3,400.00 Add to cartCompare

2 Amp Boxed Power Supply – 24v

0 out of 5
(0)

2 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 2A at 27.6V DC.

SKU: ES BPS2
49,000.00 Add to cartCompare

2 Zone Fire Alarm Panel

0 out of 5
(0)
  • Two zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 2 End of line modules ( included )
  • Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 285x95x78mm
  • Weight 2.7kg
SKU: ES MAG2
40,000.00 Add to cartCompare

2 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
  • Two zone conventional fire panel.
  • Unlimited number of call-points.
  • 30 fire detectors per zone.
  • Active end of line monitoring.
  • Two sounder circuit outputs.
  • Fault identification.
  • One-man test facility.
  • Volt free fire & fault relay.
  • 2 End of line modules ( included ).
  • Mains power supply 230V AC ? – 10%.
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included.
  • Sounder output per circuit 24V – 0.3A.
  • Working temperature 0 to 40C.
  • Dimensions 334x290x100mm.
  • Weight 2.2kg.
SKU: ES MAG2PC
40,000.00 Add to cartCompare

4 Zone Fire Alarm Panel

0 out of 5
(0)
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 315x216x78mm
  • Weight 3.5kg
SKU: ES MAG4
48,000.00 Add to cartCompare

4 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 334x290x100mm
  • Weight 2.4kg
SKU: ES MAG4PC
48,000.00 Add to cartCompare

4 Zone Sounder Expander

0 out of 5
(0)

Use with – ES MAG816 – 8 Zone Fire Panel – Expandable to 16 zones.

SKU: ES MAGSC816
11,000.00 Add to cartCompare

5 Amp Boxed Power Supply – 24v

0 out of 5
(0)
  • 5 Amp Power Supply Unit with battery monitoring
  • Mains supply 230V/240V 50Hz
  • Maximum battery size 2 x 7Ah 12V S.L.A batteries
  • Total output 5A at 27.6V DC
  • Dimensions 275(h) x 330(w) x 80(d) mm
  • Weight 5.5kg
SKU: ES BPS5
66,000.00 Add to cartCompare

8 Zone Fire Alarm Panel Expandable to 16 zones

0 out of 5
(0)
  • Up to 16 programmable zones.
  • Up to 16 sounder circuits.
  • Active end of line monitoring and head removal.
  • 32 fire detectors per zone.
  • Unlimited number of call points per zone.
  • Integral evacuate alarm button.
  • Repeater facility.
  • ‘Class change’ facility.
  • Enable/disable security key.
  • One man walk test facility.
  • Volt free fire change over relay.
  • Volt free fault change over relay.
  • Individual sounder circuit fault ID.
  • Individual zone/sounder isolate.
  • Alarm delay options.
  • BS5839 and EN54 P2/4 compliant.
  • CE certified.
  • Requires 1 x 12v ES BAT 18 Battery. See Below.
  • ABS casing.
SKU: ES MAG816
81,000.00 Add to cartCompare

Banshee Sounder Red (103dBA)

0 out of 5
(0)
  • Banshee red colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
SKU: ES BA1R
10,000.00 Add to cartCompare

Banshee Sounder White (103dBA)

0 out of 5
(0)
  • Banshee white colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
SKU: ES BA1W
12,000.00 Add to cartCompare

Boxed Power Supply 1 amp

0 out of 5
(0)

1 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 1A at 27.6V DC.

SKU: ES BPS1
38,000.00 Add to cartCompare

Fire Alarm Break Glass – Surface Call Point – Resettable Red

0 out of 5
(0)

Surface or Flush Mounting Red Call Point

SKU: ES SCP2R
4,000.00 Add to cartCompare

Fire Alarm Door Holder – 240V Ac

0 out of 5
(0)
  • 240vAC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
SKU: ES DR240
15,000.00 Add to cartCompare
Placeholder

Fire Alarm Door Holder – 24V Dc

0 out of 5
(0)
  • 24vDC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
SKU: ES DR24
14,000.00 Add to cartCompare

Fire Alarm Switch 45A Main Switch & 6A MCB – IP40

0 out of 5
(0)

Fire Alarm Switch
45A Main Switch & 6A MCB – IP40

SKU: N/A

Fire Blanket

0 out of 5
(0)
1000mm x 1000mm
Blanket made from woven glass fibre ( totally asbestos-free )
SKU: SN FB
9,500.00 Add to cartCompare

Fireline Detector Base Sounder 93dba

0 out of 5
(0)

Current: 18 mA

SKU: ES DBS1
12,000.00 Add to cartCompare

Fixed Heat Detector c/w Base

0 out of 5
(0)
  • Conventional Fixed Temperature Heat Detector c/w base
    (Schottky diode in base – diode type BYV-1060)
  • Magnet test facility
  • Operating voltage 15 to 30 V DC
  • Current in stand-by 40uA at 22.5V DC
  • Current in alarm 14 – 18mA at 22.5V DC
  • Dimensions 106 (diameter) x 48(h) mm
  • Level of protection IP30.
SKU: ES FHD2
3,600.00 Add to cartCompare

Floor Mounting Bracket for Door Holders

0 out of 5
(0)

Floor Mounting Bracket
for Door Holders

SKU: ES FMB
7,000.00 Add to cartCompare

Internal Fire Bell 24v (97dBA)

0 out of 5
(0)

Internal 6” inch (150mm) Red Fire Alarm Bell.

Sound output 97dBA.

Current consumption 15mA.

Operating voltage 24V DC.

Weight 410g.

SKU: ES IFB1
8,000.00 Add to cartCompare

Kidde – Mains Wireless Alarm Base & Accessories

0 out of 5
(0)

The RF-SFTP unit is an accessory which can simply be fitted
in place of the standard base plate on NEW Slick® (‘wireless capability’) alarms.

It enables a versatile system of interconnected alarm units to be set up without the need for additional interconnection cable.

SKU: N/A

Kidde 1kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

SKU: KD KSPS1X
9,800.00 Add to cartCompare

Kidde 2kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

SKU: KD KSPD2G
14,500.00 Add to cartCompare

Kidde Easi-Action 2kg Home Fire Extinguisher

0 out of 5
(0)

Revolutionary new ‘Easi-Action’ design, simple one-handed operation fire
extinguisher for small domestic fires.

This extinguisher is fully approved for use in the event of a fire and as a
means to clear a route to safety and as long as used when safe to do so can
also limit damage to property and possessions

SKU: KD KSF2GM
10,000.00 Add to cartCompare

Kidde Mains Heat Alarm + Rechargeable Lithium

0 out of 5
(0)

Mains powered (for professional installation) with the latest Rechargeable
Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

SKU: KD 3SFWR
18,000.00 Add to cartCompare

Kidde Mains Ionisation Smoke Alarm + Alkaline Battery

0 out of 5
(0)

Mains powered (for professional installation) with Duracell
loose alkaline battery back-up and 6-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

SKU: KD 1SFW
8,700.00 Add to cartCompare

Kidde Mains Ionisation Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)

Mains powered (for professional installation) with the latest
Rechargeable Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

SKU: KD 1SFWR
19,000.00 Add to cartCompare

Kidde Mains Optical Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)

Both models are mains powered (for professional installation) with rechargeable Lithium cell back-up and full 10-year guarantee.,

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

Optical Smoke Alarms are for use in escape and circulation routes and in areas where there
is danger of ignition of furniture and surroundings by cigarettes.

SKU: KD 2SFWR
20,000.00 Add to cartCompare

Kidde Surface Pattress – Optional

0 out of 5
(0)

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

SKU: KD SMK23U
3,000.00 Add to cartCompare
Browse Wishlist

Kidde Surface Pattress – Optional

0 out of 5
(0)

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

SKU: N/A
1,500.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E Red Max length 40Mtrs

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

SKU: NB 1/2R

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

SKU: NB 1/2
1,200.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

SKU: NB 1.5/2R

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

SKU: NB 1.5/2
1,250.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

SKU: NB 1.5/4R
1,700.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

SKU: NB 1.5/4
1,700.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 2.5mm² 2+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

SKU: NB 2.5/2R
1,200.00 Add to cartCompare

Optical Smoke Detector c/w Base

0 out of 5
(0)
  • Conventional Optical Smoke Detector c/w base
    (Schottky diode in base – diode type BYV-1060).
  • Magnet test facility.
  • Operating voltage 15 to 30 V DC.
  • Current in stand-by 60uA at 22.5V DC.
  • Current in alarm 14 – 18mA at 22.5V DC.
  • Level of protection IP40.
SKU: ES PSD2
8,500.00 Add to cartCompare

12/24v 1w Red Fire Alarm LED Strobe 60 Flash per Min

0 out of 5
(0)

12v or 24v and has a flash rate of 60/minutes.

IP rating: IP65

Current: 80mA at 12v dc
30mA at 24v dc.

Operational temperature: -10 to 50ºC.

Polycarbonate Lens and ABS base construction.

7,000.00 Add to cartCompare

13 Amp Unswitched Fused Spur – Red c/w 3Amp Fuse – Red

0 out of 5
(0)

13 Amp Unswitched Fused Spur – Red
c/w 3Amp Fuse – Red

3,400.00 Add to cartCompare

2 Amp Boxed Power Supply – 24v

0 out of 5
(0)

2 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 2A at 27.6V DC.

49,000.00 Add to cartCompare

2 Zone Fire Alarm Panel

0 out of 5
(0)
  • Two zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 2 End of line modules ( included )
  • Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 285x95x78mm
  • Weight 2.7kg
40,000.00 Add to cartCompare

2 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
  • Two zone conventional fire panel.
  • Unlimited number of call-points.
  • 30 fire detectors per zone.
  • Active end of line monitoring.
  • Two sounder circuit outputs.
  • Fault identification.
  • One-man test facility.
  • Volt free fire & fault relay.
  • 2 End of line modules ( included ).
  • Mains power supply 230V AC ? – 10%.
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included.
  • Sounder output per circuit 24V – 0.3A.
  • Working temperature 0 to 40C.
  • Dimensions 334x290x100mm.
  • Weight 2.2kg.
40,000.00 Add to cartCompare

4 Zone Fire Alarm Panel

0 out of 5
(0)
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 315x216x78mm
  • Weight 3.5kg
48,000.00 Add to cartCompare

4 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 334x290x100mm
  • Weight 2.4kg
48,000.00 Add to cartCompare

4 Zone Sounder Expander

0 out of 5
(0)

Use with – ES MAG816 – 8 Zone Fire Panel – Expandable to 16 zones.

11,000.00 Add to cartCompare

5 Amp Boxed Power Supply – 24v

0 out of 5
(0)
  • 5 Amp Power Supply Unit with battery monitoring
  • Mains supply 230V/240V 50Hz
  • Maximum battery size 2 x 7Ah 12V S.L.A batteries
  • Total output 5A at 27.6V DC
  • Dimensions 275(h) x 330(w) x 80(d) mm
  • Weight 5.5kg
66,000.00 Add to cartCompare

8 Zone Fire Alarm Panel Expandable to 16 zones

0 out of 5
(0)
  • Up to 16 programmable zones.
  • Up to 16 sounder circuits.
  • Active end of line monitoring and head removal.
  • 32 fire detectors per zone.
  • Unlimited number of call points per zone.
  • Integral evacuate alarm button.
  • Repeater facility.
  • ‘Class change’ facility.
  • Enable/disable security key.
  • One man walk test facility.
  • Volt free fire change over relay.
  • Volt free fault change over relay.
  • Individual sounder circuit fault ID.
  • Individual zone/sounder isolate.
  • Alarm delay options.
  • BS5839 and EN54 P2/4 compliant.
  • CE certified.
  • Requires 1 x 12v ES BAT 18 Battery. See Below.
  • ABS casing.
81,000.00 Add to cartCompare

Banshee Sounder Red (103dBA)

0 out of 5
(0)
  • Banshee red colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
10,000.00 Add to cartCompare

Banshee Sounder White (103dBA)

0 out of 5
(0)
  • Banshee white colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
12,000.00 Add to cartCompare

Boxed Power Supply 1 amp

0 out of 5
(0)

1 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 1A at 27.6V DC.

38,000.00 Add to cartCompare

Fire Alarm Break Glass – Surface Call Point – Resettable Red

0 out of 5
(0)

Surface or Flush Mounting Red Call Point

4,000.00 Add to cartCompare

Fire Alarm Door Holder – 240V Ac

0 out of 5
(0)
  • 240vAC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
15,000.00 Add to cartCompare
Placeholder

Fire Alarm Door Holder – 24V Dc

0 out of 5
(0)
  • 24vDC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
14,000.00 Add to cartCompare

Fire Alarm Switch 45A Main Switch & 6A MCB – IP40

0 out of 5
(0)

Fire Alarm Switch
45A Main Switch & 6A MCB – IP40

Fire Blanket

0 out of 5
(0)
1000mm x 1000mm
Blanket made from woven glass fibre ( totally asbestos-free )
9,500.00 Add to cartCompare

Fireline Detector Base Sounder 93dba

0 out of 5
(0)

Current: 18 mA

12,000.00 Add to cartCompare

Fixed Heat Detector c/w Base

0 out of 5
(0)
  • Conventional Fixed Temperature Heat Detector c/w base
    (Schottky diode in base – diode type BYV-1060)
  • Magnet test facility
  • Operating voltage 15 to 30 V DC
  • Current in stand-by 40uA at 22.5V DC
  • Current in alarm 14 – 18mA at 22.5V DC
  • Dimensions 106 (diameter) x 48(h) mm
  • Level of protection IP30.
3,600.00 Add to cartCompare

Floor Mounting Bracket for Door Holders

0 out of 5
(0)

Floor Mounting Bracket
for Door Holders

7,000.00 Add to cartCompare

Internal Fire Bell 24v (97dBA)

0 out of 5
(0)

Internal 6” inch (150mm) Red Fire Alarm Bell.

Sound output 97dBA.

Current consumption 15mA.

Operating voltage 24V DC.

Weight 410g.

8,000.00 Add to cartCompare

Kidde – Mains Wireless Alarm Base & Accessories

0 out of 5
(0)

The RF-SFTP unit is an accessory which can simply be fitted
in place of the standard base plate on NEW Slick® (‘wireless capability’) alarms.

It enables a versatile system of interconnected alarm units to be set up without the need for additional interconnection cable.

Kidde 1kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

9,800.00 Add to cartCompare

Kidde 2kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

14,500.00 Add to cartCompare

Kidde Easi-Action 2kg Home Fire Extinguisher

0 out of 5
(0)

Revolutionary new ‘Easi-Action’ design, simple one-handed operation fire
extinguisher for small domestic fires.

This extinguisher is fully approved for use in the event of a fire and as a
means to clear a route to safety and as long as used when safe to do so can
also limit damage to property and possessions

10,000.00 Add to cartCompare

Kidde Mains Heat Alarm + Rechargeable Lithium

0 out of 5
(0)

Mains powered (for professional installation) with the latest Rechargeable
Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

18,000.00 Add to cartCompare

Kidde Mains Ionisation Smoke Alarm + Alkaline Battery

0 out of 5
(0)

Mains powered (for professional installation) with Duracell
loose alkaline battery back-up and 6-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

8,700.00 Add to cartCompare

Kidde Mains Ionisation Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)

Mains powered (for professional installation) with the latest
Rechargeable Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

19,000.00 Add to cartCompare

Kidde Mains Optical Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)

Both models are mains powered (for professional installation) with rechargeable Lithium cell back-up and full 10-year guarantee.,

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

Optical Smoke Alarms are for use in escape and circulation routes and in areas where there
is danger of ignition of furniture and surroundings by cigarettes.

20,000.00 Add to cartCompare

Kidde Surface Pattress – Optional

0 out of 5
(0)

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

3,000.00 Add to cartCompare
Browse Wishlist

Kidde Surface Pattress – Optional

0 out of 5
(0)

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

1,500.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E Red Max length 40Mtrs

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,200.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,250.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,700.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,700.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 2.5mm² 2+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,200.00 Add to cartCompare

Optical Smoke Detector c/w Base

0 out of 5
(0)
  • Conventional Optical Smoke Detector c/w base
    (Schottky diode in base – diode type BYV-1060).
  • Magnet test facility.
  • Operating voltage 15 to 30 V DC.
  • Current in stand-by 60uA at 22.5V DC.
  • Current in alarm 14 – 18mA at 22.5V DC.
  • Level of protection IP40.
8,500.00 Add to cartCompare

12/24v 1w Red Fire Alarm LED Strobe 60 Flash per Min

0 out of 5
(0)

12v or 24v and has a flash rate of 60/minutes.

IP rating: IP65

Current: 80mA at 12v dc
30mA at 24v dc.

Operational temperature: -10 to 50ºC.

Polycarbonate Lens and ABS base construction.

7,000.00 Add to cartCompare

13 Amp Unswitched Fused Spur – Red c/w 3Amp Fuse – Red

0 out of 5
(0)

13 Amp Unswitched Fused Spur – Red
c/w 3Amp Fuse – Red

3,400.00 Add to cartCompare

2 Amp Boxed Power Supply – 24v

0 out of 5
(0)

2 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 2A at 27.6V DC.

49,000.00 Add to cartCompare

2 Zone Fire Alarm Panel

0 out of 5
(0)
  • Two zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 2 End of line modules ( included )
  • Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 285x95x78mm
  • Weight 2.7kg
40,000.00 Add to cartCompare

2 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
  • Two zone conventional fire panel.
  • Unlimited number of call-points.
  • 30 fire detectors per zone.
  • Active end of line monitoring.
  • Two sounder circuit outputs.
  • Fault identification.
  • One-man test facility.
  • Volt free fire & fault relay.
  • 2 End of line modules ( included ).
  • Mains power supply 230V AC ? – 10%.
  • Stand-by power supply 1 x 12V S.L.A batteries – Not included.
  • Sounder output per circuit 24V – 0.3A.
  • Working temperature 0 to 40C.
  • Dimensions 334x290x100mm.
  • Weight 2.2kg.
40,000.00 Add to cartCompare

4 Zone Fire Alarm Panel

0 out of 5
(0)
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery – Not included
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 315x216x78mm
  • Weight 3.5kg
48,000.00 Add to cartCompare

4 Zone Polycarbarbonate Fire Alarm Panel

0 out of 5
(0)
  • Four zone conventional fire panel
  • Unlimited number of call-points
  • 30 fire detectors per zone
  • Active end of line monitoring
  • Two sounder circuit outputs
  • Fault identification
  • One-man test facility
  • Volt free fire & fault relay
  • 4 End of line modules ( included )Mains power supply 230V AC ? – 10%
  • Stand-by power supply 1 x 12V S.L.A battery
  • Sounder output per circuit 24V – 0.3A
  • Working temperature 0 to 40? C
  • Dimensions 334x290x100mm
  • Weight 2.4kg
48,000.00 Add to cartCompare

4 Zone Sounder Expander

0 out of 5
(0)

Use with – ES MAG816 – 8 Zone Fire Panel – Expandable to 16 zones.

11,000.00 Add to cartCompare

5 Amp Boxed Power Supply – 24v

0 out of 5
(0)
  • 5 Amp Power Supply Unit with battery monitoring
  • Mains supply 230V/240V 50Hz
  • Maximum battery size 2 x 7Ah 12V S.L.A batteries
  • Total output 5A at 27.6V DC
  • Dimensions 275(h) x 330(w) x 80(d) mm
  • Weight 5.5kg
66,000.00 Add to cartCompare

8 Zone Fire Alarm Panel Expandable to 16 zones

0 out of 5
(0)
  • Up to 16 programmable zones.
  • Up to 16 sounder circuits.
  • Active end of line monitoring and head removal.
  • 32 fire detectors per zone.
  • Unlimited number of call points per zone.
  • Integral evacuate alarm button.
  • Repeater facility.
  • ‘Class change’ facility.
  • Enable/disable security key.
  • One man walk test facility.
  • Volt free fire change over relay.
  • Volt free fault change over relay.
  • Individual sounder circuit fault ID.
  • Individual zone/sounder isolate.
  • Alarm delay options.
  • BS5839 and EN54 P2/4 compliant.
  • CE certified.
  • Requires 1 x 12v ES BAT 18 Battery. See Below.
  • ABS casing.
81,000.00 Add to cartCompare

Banshee Sounder Red (103dBA)

0 out of 5
(0)
  • Banshee red colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
10,000.00 Add to cartCompare

Banshee Sounder White (103dBA)

0 out of 5
(0)
  • Banshee white colour electronic sounder.
  • 32 user selectable tones.
  • Maximum output 103dBA.
  • Operating voltage 24V DC.
  • Current consumption 17mA.
  • Level of protection IP45.
12,000.00 Add to cartCompare

Boxed Power Supply 1 amp

0 out of 5
(0)

1 Amp Power Supply Unit with battery monitoring.

Mains supply 230V/240V 50Hz.

Maximum battery size 2 x 7Ah 12V S.L.A batteries.

Total output 1A at 27.6V DC.

38,000.00 Add to cartCompare

Fire Alarm Break Glass – Surface Call Point – Resettable Red

0 out of 5
(0)

Surface or Flush Mounting Red Call Point

4,000.00 Add to cartCompare

Fire Alarm Door Holder – 240V Ac

0 out of 5
(0)
  • 240vAC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
15,000.00 Add to cartCompare
Placeholder

Fire Alarm Door Holder – 24V Dc

0 out of 5
(0)
  • 24vDC magnetic door holder
  • Supplied with a surface mounting box.
  • Manual release button mounted on surface box.
  • A built in release spring.
  • Supplied with a swivel keeper plate.
14,000.00 Add to cartCompare

Fire Alarm Switch 45A Main Switch & 6A MCB – IP40

0 out of 5
(0)

Fire Alarm Switch
45A Main Switch & 6A MCB – IP40

Fire Blanket

0 out of 5
(0)
1000mm x 1000mm
Blanket made from woven glass fibre ( totally asbestos-free )
9,500.00 Add to cartCompare

Fireline Detector Base Sounder 93dba

0 out of 5
(0)

Current: 18 mA

12,000.00 Add to cartCompare

Fixed Heat Detector c/w Base

0 out of 5
(0)
  • Conventional Fixed Temperature Heat Detector c/w base
    (Schottky diode in base – diode type BYV-1060)
  • Magnet test facility
  • Operating voltage 15 to 30 V DC
  • Current in stand-by 40uA at 22.5V DC
  • Current in alarm 14 – 18mA at 22.5V DC
  • Dimensions 106 (diameter) x 48(h) mm
  • Level of protection IP30.
3,600.00 Add to cartCompare

Floor Mounting Bracket for Door Holders

0 out of 5
(0)

Floor Mounting Bracket
for Door Holders

7,000.00 Add to cartCompare

Internal Fire Bell 24v (97dBA)

0 out of 5
(0)

Internal 6” inch (150mm) Red Fire Alarm Bell.

Sound output 97dBA.

Current consumption 15mA.

Operating voltage 24V DC.

Weight 410g.

8,000.00 Add to cartCompare

Kidde – Mains Wireless Alarm Base & Accessories

0 out of 5
(0)

The RF-SFTP unit is an accessory which can simply be fitted
in place of the standard base plate on NEW Slick® (‘wireless capability’) alarms.

It enables a versatile system of interconnected alarm units to be set up without the need for additional interconnection cable.

Kidde 1kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

9,800.00 Add to cartCompare

Kidde 2kg ‘Multi-Purpose’ Fire Extinguisher

0 out of 5
(0)

This traditionally designed extinguisher is fully approved for use
in the event of a fire and as a means to clear a route to safety and
as long as used when safe to do so can also limit damage to property
and possessions

14,500.00 Add to cartCompare

Kidde Easi-Action 2kg Home Fire Extinguisher

0 out of 5
(0)

Revolutionary new ‘Easi-Action’ design, simple one-handed operation fire
extinguisher for small domestic fires.

This extinguisher is fully approved for use in the event of a fire and as a
means to clear a route to safety and as long as used when safe to do so can
also limit damage to property and possessions

10,000.00 Add to cartCompare

Kidde Mains Heat Alarm + Rechargeable Lithium

0 out of 5
(0)

Mains powered (for professional installation) with the latest Rechargeable
Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

18,000.00 Add to cartCompare

Kidde Mains Ionisation Smoke Alarm + Alkaline Battery

0 out of 5
(0)

Mains powered (for professional installation) with Duracell
loose alkaline battery back-up and 6-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

8,700.00 Add to cartCompare

Kidde Mains Ionisation Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)

Mains powered (for professional installation) with the latest
Rechargeable Polymer Lithium cell back-up and full 10-year guarantee.

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

19,000.00 Add to cartCompare

Kidde Mains Optical Smoke Alarm + Rechargeable Lithium Battery

0 out of 5
(0)

Both models are mains powered (for professional installation) with rechargeable Lithium cell back-up and full 10-year guarantee.,

Complying with current minimum requirements of the relevant Building Regulations for
new housing, i.e. Grade D (BS5839, Part 6).

Optical Smoke Alarms are for use in escape and circulation routes and in areas where there
is danger of ignition of furniture and surroundings by cigarettes.

20,000.00 Add to cartCompare

Kidde Surface Pattress – Optional

0 out of 5
(0)

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

3,000.00 Add to cartCompare
Browse Wishlist

Kidde Surface Pattress – Optional

0 out of 5
(0)

Surface pattress 4 way terminal block – Use when cabling via mini
trunking eg no ceiling access/concrete ceilings.

1,500.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E Red Max length 40Mtrs

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

NoBurn Fire Platinum Resistant Cable 1.0mm² 2+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,200.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

NoBurn Fire Platinum Resistant Cable 1.5mm² 2+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,250.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,700.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 1.5mm² 4+E White

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,700.00 Add to cartCompare

NoBurn Fire Platinum Resistant Cable 2.5mm² 2+E Red

0 out of 5
(0)

Fire Resistant, Zero Halogen, Low Smoke Cables

BASEC & LPCB approved to BS5839-1:2013 26.2d & all current ‘Standard’ fire & emergency lighting standards

Supplied on Robust Plastic Reels
or cut to length

1,200.00 Add to cartCompare

Optical Smoke Detector c/w Base

0 out of 5
(0)
  • Conventional Optical Smoke Detector c/w base
    (Schottky diode in base – diode type BYV-1060).
  • Magnet test facility.
  • Operating voltage 15 to 30 V DC.
  • Current in stand-by 60uA at 22.5V DC.
  • Current in alarm 14 – 18mA at 22.5V DC.
  • Level of protection IP40.
8,500.00 Add to cartCompare

Showing 1–40 of 41 results